欢乐颂第二季,手机推荐排行榜

產品展示

當前位置:上海五久自動化設備有限公司>產品中心> 硬度計1700-A

查看大圖

產品名稱：硬度計1700-A
產品型號：1700-A
產品價格：電議
產品產地：中國大陸
訪問次數：359 發布時間：2013/5/21 12:33:11
簡介內容：1700-A硬度計Max-Hand 硬度計
現有ASTM類型：A, D, B, C, DO, E, and O
尺寸：" x "H
重量：6 oz
特征：
包含NIST標準鑒定證書
符合ASTM D-2240標準
一年質保
定做攜帶式儀器箱
重設之前一直手持
讀取值和徐變
我要詢價

詳細內容

硬度計1700-A

1700-A硬度計

Max-Hand 硬度計

現有ASTM類型：A, D, B, C, DO, E, ａnd O

尺寸：2.25" x 6.125"H

重量：6 oz

特征：

包含NIST標準鑒定證書

符合ASTM D-2240標準

一年質保

定做攜帶式儀器箱

重設之前一直手持

讀取值和徐變

Description:

Introduced in 1965, the Model 1700 was designed to enable the user to observe ａnd measure the "creep" present in a specimen. Creep refers to the tendency of the durometer indentor to continue to penetrate a specimen over time, giving lower durometer readings. For example, if the durometer is held against a specimen in full contact ａnd with constant pressure, the durometer reading will decrease over a period of seconds after the initial reading is taken. So, in a specimen with creep, the initial reading may be 35.0 durometer points, while the reading after three seconds may be 33.5 durometer points. The Model 1700 features a max- hand ａnd an active hand so that creep may be observed. The max hand holds the maximum reading while the active hand can be observed creeping down the scale. The 1700 is equipped with a max-hand reset button on the top left of the gauge.

DUROMETER TYPES	APPLICATIONS	INDENTOR SHAPE	MAIN SPRING
TYPE A （ASTM D2240）	Soft rubber, plastics, ａnd elastomers, printer＇s rolls.	Flat Cone Point 35° Included Angle	822 GM 1.81 LB.
TYPE D （ASTM D2240）	Hard rubber ａnd plastics such as thermo plastics, flooring ａnd bowling balls.	Sharp Cone Point 30° Included Angle	4536 GM 10.0 LB.
TYPE B （ASTM D2240）	Harder elastomers ａnd plastics. Paper ａnd fibrous materials, Use above 93 Duro A.	Sharp Cone Point 30° Included Angle	822 GM 1.81 LB
TYPE C （ASTM D2240）	Medium hard elastomers ａnd plastics. Also useful to avoid surface marks.	Flat Cone Point 35° Included Angle	4536 GM 10.0 LB
TYPE DO （ASTM D2240）	Dense granular material, textile windings.	3/32" Spherical	4536 GM 10.0 LB
TYPE O （ASTM D2240）	Very soft elastomers, textile windings, soft granular materials. Use below 20 Duro A.	3/32" Spherical	822 GM 1.81 LB
TYPE OO （ASTM D2240）	Light foams, sponge rubber gels, animal tissue.	3/32" Spherical	113 GM
TYPE OOO （ASTM D2240）	Ultra soft gels ａnd sponge rubber.	1/2" Spherical	113 GM
TYPE M （ASTM D2240）	Materials as thin as .050"	Sharp Cone Point 30° Included Angle